

Two-car garage, full-flake system
The slab had oil spots at both bays and a hairline crack at the door. We ground it open, filled the crack, and ran a full-flake system with a sun-stable topcoat.
Resin floors, built thick on a ground slab — garages, shops, and showpiece rooms.

Epoxy flooring is a resin system, not a paint. Two-part resin and hardener build a thick film that bonds to ground concrete, resists chemicals, and cleans with a mop. Done right it lasts 15 to 20 years in a home garage.
The word epoxy covers a family of systems. A flake system is the everyday garage floor. A polyaspartic topcoat is what keeps it from yellowing at the door. Metallic epoxy is the showpiece — pigment moved in wet resin for a marbled look. Commercial floors run thicker still, with builds matched to forklifts and spills.
The pages in this silo take each one in turn. Every page names the system honestly, including the ones we are still confirming with our partner — those pages say so, and fit is confirmed at the in-person estimate.
From the install itself to the showpiece and the shop floor.

Full flake broadcast over a ground slab, sealed with a clear topcoat. Our most-chosen garage floor.

Fast-cure, sun-stable coatings for garages that sit in Gulf heat and light.

Peeling kit floors and cracked slabs, ground back and recoated the right way.

The full install, step by step: test, grind, repair, coat, and cure.

Poured metallic finishes with depth and movement. Fit confirmed at the estimate.

Tough, easy-clean floors for shops, stores, and work spaces.

Heavy-build floors for forklift traffic, spills, and daily wear.

Slip-aware, sun-stable deck coatings. Fit confirmed at the estimate.

Screened lanais coated for bare feet, rain blow-in, and daily use.

Covered patios and porches that sweep clean and shrug off storms.

Exterior flatwork coatings for driveways and carports. Fit confirmed at the estimate.

Thin overlays that renew worn concrete without tearing it out. Fit confirmed at the estimate.
The build that holds up best on the Gulf coast is a hybrid: an epoxy base for bond and build, full flake for grip and looks, and a polyaspartic clear topcoat for wear and sun. Plain epoxy alone ambers in the sun and cures slowly. The hybrid gives you the bond of epoxy and the cure and color hold of polyaspartic.


The slab had oil spots at both bays and a hairline crack at the door. We ground it open, filled the crack, and ran a full-flake system with a sun-stable topcoat.


One finish ties the three-car garage to the screened lanai out back. The slab tested damp near the door, so a moisture primer went down first.
The old deck paint was chalky and slick when wet. We stripped it, repaired two settled corners, and coated with grip texture and a sun-stable topcoat.
Tell us about the floor. We call back with a time to come look — the written price comes after the in-person look, before any work starts.
Rather talk? Call (352) 555-0162.
Ground moisture pushes up through the slab. A coating over a damp slab can blister and lift months later. The test tells us whether a moisture primer goes down first — in Citrus County, with a high water table, we test every floor.
We prime with a moisture barrier first. It adds cost and a step, and it is the step that keeps the floor down. We would rather tell you that at the estimate than patch a floor later.
Most two-car garages take one to two days of work, depending on the system and the slab. Polyaspartic topcoats cure fast, so cars are usually back the next day. Your written schedule comes at the estimate.
Only after it comes off. We grind the old coating away and start from bare concrete. Coating over a peeling layer just gives the new floor something loose to hold onto.
Flake texture gives the floor grip, and we add anti-slip grit where the floor gets wet — lanais, pool decks, and garage entries. A smooth gloss finish belongs indoors, not by a pool.
Pick your floor and its size. The range updates as you go.
Add-ons your floor may need
Every floor is different. Slab condition moves the final number more than size does.
These are planning ranges, not a quote — your final price is confirmed after an in-person look, before any work starts.