

Two-car garage, full-flake system
The slab had oil spots at both bays and a hairline crack at the door. We ground it open, filled the crack, and ran a full-flake system with a sun-stable topcoat.
A showpiece finish — pigment moved in wet resin for depth you cannot get from flake.

A metallic epoxy floor is poured, not broadcast. Metallic pigment is moved through wet resin with a roller and squeegee, and it settles into marbled swirls and depth. No two floors come out alike — that is the point, and it is why the finish suits showpiece garages, showrooms, and living spaces.
Metallic work is the most labor-heavy finish on the menu. It takes more time on the floor, more coats, and a steadier hand than a flake system. It also shows the slab more honestly, so the prep underneath matters even more.
Metallic runs higher than flake — in the trade it is usually quoted well above the flake range. We do not put a metallic price in the calculator until our partner confirms the system and the rate. The estimate is where the number gets set, in writing.
This finish is on the trade menu and we are confirming it with our partner — whether he installs metallic, and how he wants it priced. Everything below is education about the finish itself. Fit, system, and price are confirmed at the in-person estimate, and no metallic price appears in our calculator.
A garage that doubles as a showroom, a home gym or living space on slab, a storefront. Where the floor is the room's feature, metallic earns its keep. Where the floor takes forklifts and oil, a flake or solid system is the better tool.
Metallic is a poured art finish. The swirls settle as the resin cures, so the final look is set on install day and cannot be re-rolled later. Samples show the family of the look, not the exact floor — and we say that before you choose.


The slab had oil spots at both bays and a hairline crack at the door. We ground it open, filled the crack, and ran a full-flake system with a sun-stable topcoat.


One finish ties the three-car garage to the screened lanai out back. The slab tested damp near the door, so a moisture primer went down first.
A working garage that could not sit empty for days. The fast-cure system went down in one visit and the cars were back the next day, per the written schedule.
Tell us about the floor. We call back with a time to come look — the written price comes after the in-person look, before any work starts.
Rather talk? Call (352) 555-0162.
We are confirming the metallic system with our partner now. The page explains the finish honestly; fit and price are confirmed at the in-person estimate before anything is booked.
Metallic is the most labor-heavy finish we write about, and it prices above flake. We do not publish a metallic range until the system is confirmed — your written price comes at the estimate.
More than flake does. Metallic is a smooth poured finish, so the slab underneath has to be right. The grind and repair matter even more on a metallic job.
Metallic is an interior showpiece finish. Outdoor floors need texture and sun stability first, so flake systems with grip are the usual outdoor pick.
Longer than a flake garage — more coats, more cure time, and more work on the floor. The schedule is written down at the estimate, once the slab has been seen.
Pick your floor and its size. The range updates as you go.
Add-ons your floor may need
Every floor is different. Slab condition moves the final number more than size does.
These are planning ranges, not a quote — your final price is confirmed after an in-person look, before any work starts.